|
Add:
|
"Slide Guides" - Sliding Glass Patio Door Roller Replacement Kit
Model: 1004
Price: $35.95
|
|
There are over 258 makes and models of rollers for sliding glass doors. Assuming you find the right one, then you normally have to spend a good bit of time to take the entire bottom of the door off to get the rollers out. Oops, wrong roller. Put it all back together & start over. What a pain! They are a "Wham-Bam" repair that should virtually last a lifetime! These universal sliding glass patio door roller replacements are 4 inches long and each one is made out of really hard, slippery, ... more info |
|
Add:
|
"Slide-Ezzz" Sliding Door Repair Kits
Model: 1001
Price: $35.95
|
|
For sliding glass patio doors that don't slide good any where due to worn out sliding patio door track or worn out sliding glass patio door rollers. No need to remove existing sliding glass patio door hardware! New and improved Teflon impregnated "Corner Bracket". By putting hard, slippery plastic in the slidng door track and a specially formed piece of hard, slippery TEFLON IMPREGNATED plastic on the corners of the glass sliding patio door, the sliding door then slides plastic on ... more info |
|
... more info
|
1/4 inch Glass Sliding Door Track Roller Rail Cover
Model: 1003
Price: $29.95
|
|
For doors that don't have enough room for the 9/16" roller rail cover when moving the door and go "bump", "bump", "bump" (due to dips in the roller rail). A stainless steel "C" shaped roller rail cover designed for sliding glass patio doors where there is not much room to lift up on the sliding door or for sliding glass doors where the door track or threshold is even with the roller rail. Cover snaps onto existing sliding glass patio door track. So there is no need to remove existing ... more info |
|
... more info
|
9/16 inch Glass Sliding Door Track Roller Rail Cover
Model: 1002
Price: $49.95
|
|
For glass sliding patio doors that go "bump", "bump", "bump" (due to dips in the roller rail) when moving the sliding glass patio door. Also designed for sliding doors that slide good somewhere on the door track, then stick and/or are hard to move from worn areas in the roller rail that cause the sliding door to rub on the threshold or door track thereby making the sliding door stick & hard to move. The roller rail cover stands on the door threshold, thereby giving a straight roller rail and ... more info |
|
Add:
|
Glass Sliding Door Security Bar
Model: 1006
Price: $32.95
|
|
Brushed aluminum telescoping security bar for doors 28 to 48 inches wide to prevent forced entry through sliding glass doors. |
|
Add:
|
JB Weld 2 Part Epoxy Adhesive
Model: 1008
Price: $6.75
|
|
JB Weld Mini is suggested to be used with roller rail cover installation. Just put a dab under each end of the roller rail cover to insure it stays in place. It IS NOT RECOMMENDED to adhere the ENTIRE RAIL COVER, just in case you may need to remove it in the future. |
|
Add:
|
Replacement Corner Brackets
Model: 1009
Price: $6.95
|
|
Teflon impregnated replacement "Corner Brackets" for "Slide-Ezzz" Sliding Door Repair Kits. There is a 1 YEAR FREE REPLACEMENT for those rare instances where the "Corner Brackets" fail within the first year after purchase. Teflon impregnated replacement "Corner Brackets" for "Slide-Ezzz" Sliding Door Repair Kit. Comes as a pair. Includes shims and screws. |
|
Add:
|
Screen Door "Slide Guides" - Screen Door Roller Replacement Kit
Model: 1005
Price: $9.95
|
|
Universal screen door roller replacement. Designed to repair sliding screen patio doors where the door keeps getting stuck, jamming and falling off due to a worn sliding glass patio door track. This normally happens because the corners of the sliding screen door get caught on the door track or threshold when moving it. No need to remove existing sliding glass patio door hardware! Universal screen door roller repair. With door on, simply push "Screen Door Slide Guide" into the standard 1/4" ... more info |
|
... more info
|
Screen Door Roller Rail Cover
Model: 1111
Price: $29.95
|
|
Screen door rail covers are designed to come to a point so that the screen door rollers "hold onto" the rail. They are roughly 1/4 inch high by 1 inch wide. Simply remove screen door, place rail cover over rail, glue into place and replace door. How simple is that? Currently only comes in anodized (silver). Screen door rail cover comes with a tube of JB Weld and in standard 3 & 4 foot lengths. Solid 6 & 8 foot lengths can be ordered but there is an additional shipping charge. |
|
