For glass sliding patio doors that go "bump", "bump", "bump" (due to dips in the roller rail) when moving the sliding glass patio door. Also designed for sliding doors that slide good somewhere on the door track, then stick and/or are hard to move from worn areas in the roller rail that cause the sliding door to rub on the threshold or door track thereby making the sliding door stick & hard to move.
The roller rail cover stands on the door threshold, thereby giving a straight roller rail and supporting the door the entire length of the door track. No need to remove existing sliding glass patio door hardware or the sliding glass patio door track!
A stainless steel "A" shaped roller rail cover is designed for sliding glass patio doors where support is necessary due to dips.
No need to remove existing glass sliding patio door hardware. Cover goes over existing sliding glass patio door track hardware.
Comes in 3 & 4 foot sections.
2 - 3 foot sections = 6 foot door, 2 - 4 foot sections = 8 foot door
PRICE IS TO FIX STANDARD SLIDING GLASS DOOR UP TO 8 FEET IN LENGTH, NOT PER PIECE.
Additional shipping charges apply for one SOLID 6 & 8 foot sections. Additional 3 & 4 foot sections can be ordered for larger sliding doors.
Can also be used to repair sliding patio screen door tracks if your sliding screen door keeps falling off or sticking. Needs to be purchased in solid 6 & 8 foot lengths.
Printable Installation Instructions
