Sliding Glass Patio Door Repair Kit or Sliding Door Wheel Roller Replacement Kit
Regular price
$48.95
It's a quick, easy and permanent fix for virtually any sliding glass door that sticks or doesn't slide good at all due to:
* worn out or bumpy track sliding patio door track
* worn out sliding glass door wheels or rollers that could use replaced
* or both.
By putting a hard, Teflon impregnated, specially formed, slippery plastic on the corners of the sliding door (Corner Brackets) and adhering a hard, flat, slippery plastic on the sliding door track or threshold (Tracking Strips), the sliding door then slides Teflon on plastic.
Check out this great testimonial from one of our many satisfied customers:
This "Sliding Door Repair Kit" can be purchased on the West Coast at:
The Teflon impregnated material used for the "Corner Brackets" was originally designed for very abusive applications, such as chain guides.
Therefore, the "Sliding Door Repair Kit" should LAST FOR THOUSANDS AND THOUSANDS OF CYCLES OR FOR YEARS & YEARS!
The 8 foot long "Tracking Strips" come in either white or black to best match your sliding door frame color.
Additional "Tracking Strips" can be purchased for larger sliding doors.
No need to remove existing sliding glass door hardware!
The sliding door will SLIDE LIKE NEW! QUIET TOO!
** Kit can be usually be INSTALLED IN AN HOUR OR LESS - - - - - WITHOUT REMOVING THE DOOR! **
Quick Installation Instructions
2) (a) Just slide the two plastic strips under the sliding door an cut "Strips" to length. Pull them back out and rough up side that is to be glued with sandpaper so the glue has something to "bite" into.
b) Slide "strips" back under door and apply glue to both sides of rail and stick "Strips" down
(c) slide door to opposite end and do the same to the other side.
That's it! Your done! IT'S JUST THAT EASY!
Get ready for years and years of a great operating sliding door and be careful not to throw the door through the wall!
REPAIRS MOST SLIDING GLASS DOORS!
There is a 60 day money back warranty if your not happy with the performance of the product and a one year manufacturers warranty on all parts.
Kit Contents:
4 - Self drilling Phillips Head screws Teflon impregnated "Corner Brackets" come only in black and use the existing roller rail as a guide so the door slides straight. "Tracking Strips" or the hard, slippery plastic strips that are glued to the threshold come in either black or white.
Kit includes all the parts, including screws and adhesive, to repair one standard sliding glass patio door up to 8 feet in length.
Additional "Tracking Strips" can be ordered for sliding doors longer than 8 feet in length.
There is no need to order or use any other type of sliding door replacement hardware when using the "Slide-Ezzz" Sliding Door Repair Kit.
IMPORTANT PRODUCT NOTES:
The "Tracking Strips" are 1/8 inch thick and the "prongs" that go under the sliding door on the "Corner Brackets" are 1/4 inch thick.
Therefore you will need 1/2 inch of room (giving 1/8" of "slop margin" so the door doesn't bind) between the flat portion of the threshold or sliding door track and the bottom of the sliding door to install this "Sliding Door Repair Kit". Pick up on the sliding door and measure to make sure there is enough room.
-----------------------------------------------
Be sure to rough up the side of the "Strips" that are to be glued with 60 or 80 grit sandpaper so the adhesive has something to "bite" into.
-----------------------------------------------
The best lubricant is ArmourAll Wipes (or the generic kind) or car wax as neither will attract dust and dirt as a liquid silicone spray or WD 40 does.
-----------------------------------------------
To "Shim" the door for leveling purposes and so that it closes without a gap (if door is crooked), apply a dab of glue to "shim" and apply "shim" to top of the "prong" going under the sliding door on the "Corner Bracket".
-----------------------------------------------
For lower level beachfront sliding doors, use only one "Tracking Strip" on the inside as the wind blows the sand against the sliding door threshold track. Using the "Tracking Strip" on the outside may cause the door to be hard to slide and the "Sliding Door Repair Kit" may not last as long as all the weight of the door is placed on a smaller surface area. You can use our "Sliding Door Rebuild Kit" instead for this application.
---------------------------------------------------
Product also DOES NOT WORK on doors with a "U" shaped frame as the "Corner Brackets" need a flat surface on which to be adhered.
A door with a "U" shaped frame is pictured below:
A work around for a "U" shaped door is to use a "Dremel Tool" or sander to shape the "Corner Bracket" like in the picture below:
---------------------------------------------------
"Kit" also does NOT work on extremely large and heavy (250 pounds plus) sliding doors such as Arcadia or Hurricane Doors.
AMERICAN MADE!