Straight Backed Replacement Weather Stripping - .270 (1/4" backed) - 100 Foot - CLICK HERE FOR PILE HEIGHTS & PRICES

This is one of the more popular sizes of weatherstripping that comes in new sliding doors and windows.

This replacement weatherstripping needs to be slid into the channel for it to be replaced.

It is NOT "Finned".  ie, it does NOT have a plastic barrier running the length of it.

Straight backed, NON-Adhesive glass sliding patio door weatherstripping.

BACKING = .270 (6.86 MM or a little bit bigger than 1/4")

Charcoal gray in color.

Backing is cut straight, NOT zippered.

Simple and easy to install.

Simply cut old weather stripping down the middle with a razor or utility knife. Pull out old weather stripping. Slide the new weather strip in the "T" channel.

If new weather stripping is hard to slide in, you may be able to place it over the "T" channel and push it in with a thin, dull object, like a butter knife or putty knife.

A dab of glue may be needed at each end to insure the new weather strip doesn't come loose.

Watch this video to see How to determine the size of weather stripping you need.

Watch this video to see how easy it is to Install Our Zipper Backed Weather Stripping

Need a FREE SAMPLE to insure the weatherstripping is going to fit properly? There is a slight shipping charge for the free sample. 

Click here to get your sample: Weather Stripping Sample

Weatherstripping comes in a 100 foot roll.